30-Ton Chillers
This relatively compact chiller is a great solution when you have a smaller heat or process load that you need to cool down. Match it up with our 30 ton air handler and you have a very efficient closed loop. Even standing alone and tackling a heat load that was previously a problem, this star performer really shines. When tricky building conditions make cooling difficult, this is one of the most effective options to get the cooling you need.
Features:
- Can be paired with our 30 ton air handler for convenient delivery of cool air.
- Can be hooked into an existing chilled loop system to replace a damaged or broken chiller.
- Positioning is simple; roll, forklift or hoist into place.
- Requires 208 volt three phase power.
Applications:
- Oil & Gas
- Manufacturing
- Film Studios
- Large Commercial Buildings
IMG_3850-web
Concrete generates large amounts of heat while curing, a process known as hydration. Installing embedded cooling lines prior to pouring allows us to circulate chilled water throughout the slab and strip the heat away in a controlled manner. This 30 ton unit coupled with a 1000 litre tote ensured the curing process was successful and without issue.
037web
During the middle of a winter season, this unit was used as part of a complex system to quickly cool down batches of soup to a temperature safe enough to package. Without our chiller, the factory would have needed to wait until the soup cooled naturally; which would add delays to their production cycle.
3
This 30 ton chiller was located outside a film stage. Relatively small and compact, it was quiet enough to run when they were recording sound. A closed loop of hose connected the chiller to one of our air-handling units inside. Flexible ducting easily directed the conditioned air to wherever it was needed.