Hydronic Heaters & Fan Coils

HGB400H11

This compact hydronic heater is perfect for medium-sized structures, providing quick heat when needed. Its low-pressure operation and atmospheric venting eliminate the need for special boiler certification or supervision.

Features:

• Tie directly into a building’s heat system or add fan coils for heat distribution.
• Positioning is simple- roll, forklift or hoist into place.
• Weatherproof construction.
• Requires readily available 115-volt single phase power.

Temporary Heating Applications:

• HVAC Retrofits and System Upgrades
• Industrial Plants
• Emergency Heat

Download Data Sheet

HGB980H11

This hydronic heater packs lots of heating punch. The capacity is a good size to manage mid range heating projects. Need more capacity? Add additional units for redundancy or increased capacity. These units can be utilized individually as a stand-alone unit for a boiler tie-in or paired with fan coils to heat the air in your space. This boiler can run off propane cylinders or a natural gas feed.

Features:

• For use either with portable fan coils or directly connected to a building’s glycol/water loop
• Positioning is simple — roll, forklift, or hoist into place
• Requires a 208 volt, 50 amp circuit for power

Temporary Heating Applications:

• HVAC Retrofits and System Upgrades
• Temporary Structures
• Boiler Re-Fits

Download Data Sheet

HGB1200H21

Whether you need to temporarily replace an existing boiler or you have a complex heating application that requires a high degree of customization, this unit is the one for the job. This hydronic heater requires a fuel source from either a large propane cylinder or direct natural gas hook-up.

Features:

• For use either with portable fan coils or directly into a building’s glycol/water loop using our heat exchangers
• Positioning is simple — roll, forklift or hoist into place
• Requires 208-volt w/ neutral, single-phase power

Temporary Heating Applications:

• HVAC Retrofits and System Upgrades
• Temporary Structures
• Industrial Plants
• Concrete Curing

Download Data Sheet

Hydronic Fan Coils

These stainless-steel hydronic fan coils effectively deliver warm, dry heat into your space. From finished buildings to construction sites, and anywhere else temporary heat is required, our fan coils provide a practical way to deliver distributed heat. A stable, upright design means these units stay in place, and the large soft wheels ensure portability when they need to be removed or relocated. They are available in multiple sizes to ensure the right package is utilized on your project.

Features:

• Easily loaded filter racks allow for drop-in cartridges for air filtration
• Very quiet and reliable operation
• Convenient 115-volt power means easy plug-in and turn-on

Temporary Heating Applications:

• HVAC Retrofits and System upgrades
• Construction Sites
• Special Events
• Tenant improvements

80K & 200K BTU Data Sheet

Dryair HEFA Data Sheet

Hydronic Heat Exchangers: Potable & Non-Potable

This plate heat exchanger series is the perfect solution for delivering heat into a building. It is an ideal addition to our hydronic heating equipment that ensures a separate fluid loop between our heater and the building. Each unit is equipped with an onboard pump and can deliver hot fluid in any potable or non-potable application.

Features:

• Monitor supply and return loop temperatures
• On board pump with by-pass valve
• Compact design allows this unit to easily fit through any mechanical room door

Temporary Heating Applications:

• Boiler Tie-Ins
• Domestic Hot Water Applications
• Specialized Heating or Cooling Projects

Download Data Sheet

HHP1800 1.8MM BTU Hydronic Heat Pro Trailer

The 1.8 million BTU Hydro Heat Pro combines the heating power of the efficient DryAir water heater system and two fluid to fluid plate heat exchangers into one ready-to-move trailer package. The system uses three pumps, one for the water heater’s heating fluid circuit (food grade glycol) and one for each of the two plate heat exchanger output loops.

Download Data Sheet

HSX1000V21

The system transfers heat from “on-site” steam to a circuit of heat transfer fluid that enables the use of any of the DryAir accessories for heat distribution.

Automatic temperature control allows the user to set the desired supply fluid temperature by modulating the flow of steam through the heating unit.

One unit will provide enough heating capacity to heat up to 50,000 sq ft (dependent on the steam source capacity)!

Using an existing steam source proves the most versatile and the most economical approach to delivering temporary heat on a constuction site/building renovation.

Download Data Sheet