HGB980H11
This hydronic heater packs lots of heating punch. The capacity is a good size to manage mid range heating projects. Need more capacity? Add additional units for redundancy or increased capacity. These units can be utilized individually as a stand-alone unit for a boiler tie-in or paired with fan coils to heat the air in your space. This boiler can run off propane cylinders or a natural gas feed.
Features:
- For use either with portable fan coils or directly connected to a building’s glycol/water loop
- Positioning is simple — roll, forklift, or hoist into place
- Requires a 208 volt, 50 amp circuit for power
Temporary Heating Applications:
- HVAC Retrofits and System Upgrades
- Temporary Structures
- Boiler Re-Fits
DCIM100MEDIADJI_0020.JPG
This structure hosts a Christmas Craft fair every December. It is normally under-heated and therefore not warm enough to keep vendors and their customers comfortable in cold weather. This hydronic heater was installed to distribute hot water to fan coils located inside the structure.
App 2 HGB980-edited
The versatility of this hydronic heater allows it to be placed outdoors adjacent to structures to deliver hot water into the space. We can tie into the existing piping or provide fan coils to distribute the warm air in the space.
App 3 HGB980-edited
This construction project required temporary heat through the winter months. Our hydronic heater delivered a constant flow of hot water to these fan coils located inside the areas under renovation. This warm environment greatly reduced the wait time between drywall mudding and painting recoats.