This robust chiller is a great solution when you have a building or a manufacturing process load that you need dealt with. Match it up with our 50-ton air handler and you have a powerful delivery of cool air into your workspace. As a direct tie-in and tackling a heat load that was previously a problem, this star performer really shines. When challenging environments make cooling difficult, this is one of the most effective options to get the cooling you need.
- Can be paired with our 50-ton air handler for powerful delivery of cool air.
- Can be tied-in to an existing chilled loop system to temporarily replace a damaged or broken chiller.
- Positioning is simple; either forklift or hoist into place.
- Voltage code – (460/3/60)
- Across the line start
- SP non fusible disc. switch
- Control transformer
- Both suction & discharge pressure readout kit
- North American safety code (cETL)
- Compressor crankcase heater
- Differential pressure switch with flow safety interlock
- ASME pressure vessel & associated codes
- Pre-coated fin condenser coil
- Wire enclosure panels (condenser only)
- Low sound fans
- Oil & Gas
- Film Studios
- Large Commercial Buildings